馬賽克玻纖瓦最初的出現，是擴充單層玻纖瓦的多樣性，豐富單層玻纖瓦的風格、類型而設定的一種單層多樣性玻纖瓦，其獨特的菱形外形，讓單調的單層標準型玻纖瓦在屋面上出現了另一種身影，波動的流水線條，高低井然有序的排列，瞬間讓單層玻纖瓦在基層的作用提升到了頂層。在還沒有實踐應用成功之前，馬賽克只能算是單層玻纖瓦的一個噓頭，表面上風光，大部分時間是被打入冷宮的，陪襯的時候更多一些，隨著時間的推移，由于區域差異的問題，才使得馬賽克玻纖瓦能重見天日。這期間，最主要是懸掛在馬賽克玻纖瓦頭上的兩把刀問題的得以解決。
Mosaic glass tile first is expanded monolayer glass tile diversity and rich monolayer glass tile set of style, the type of a single variety of glass tile and its unique diamond shape, let monotonous single standard glass tile another shadow on the roof, fluctuations in the water line, level ordered arrangement, instantly make single-layer glass tile in the role of grass-roots promotion to the top. Before has not been successfully applied in practice, mosaic can only be regarded as monolayer glass tile a boo head, the scenery on the surface, most of the time is be in limbo, foil when some more, with the passage of time, due to regional differences, which makes the mosaic glass fiber tile to reopen. During this period, the main is to hang two knives in the glass mosaic watou solution.
第一個問題，馬賽克玻纖瓦因為其被剪裁掉的部分更多，每包的重量比單層標準型要輕很多，太輕使得其在大眾的眼光中被視為雞肋，原本單層標準型玻纖瓦已經算是夠輕了，可拿馬賽克玻纖瓦一比，更輕了，先不說其固定能力如何，就其重量而言，已經讓許多的玻纖瓦專家嘆息搖頭了，而且其在生產過程中的大量浪費，讓大家覺得更為不值。由于玻纖瓦采用的是外露面積來計算屋面的面積，所有搭接部分是看不見的，馬賽克玻纖瓦每片外露的寬度是148mm,長度是1000mm。因為有搭接部分，才不至于讓馬賽克玻纖瓦外露部分顯得露骨，其下面又有搭接參合部位，這樣的搭接方法，最終讓馬賽克玻纖瓦能夠穩穩的投入生產，并保證了其在屋面上最基本的施工使用。
第二個問題的解決是得益于天時，由于北方地區風沙比較大，玻纖瓦需要更強悍的固定能力才能保以存活，不管是采取單層標準型還是雙層標準型玻纖瓦，都需要其正面采取6個釘子固定，背面需要更多的瀝青膠的固定，在常規的情況下，無論是單層還是雙層，正面采取6個釘子固定之后，背面只需要采取點膠的方式固定玻纖瓦即可。但由于北方風沙大的緣故，無論是單層還是多層都需要加大背面膠的點膠面積，為了減少更多的負載固定重量，雙層標準型玻纖瓦被排除在外，因為其重量要重很多，單層標準型成了首選。但由于大面積施膠，對于瀝青膠的成本又會有一個大幅度的提升，即使采取背面80%的瀝青膠來計算，成本也是高的嚇人，在這種特殊的情況下，馬賽克玻纖瓦呼之欲出，由于其被剪裁的地方多，背面施膠就會大量減少，背面只需要采取80%的瀝青膠固定，即可在北方區域大面積推廣。就這樣，馬賽克恰到好處的成為了北方風沙大的區域的首選，解決了實踐應用中的一大難關，在此后的大量北方玻纖瓦施工實踐中，馬賽克玻纖瓦已經成為了不二之選。
To solve the second problem is the due day, due to relatively large northern sand, glass tile need more powerful fixed ability in order to ensure survival, whether to take a single standard or double standard type glass tile, need the front by taking six nails fixed, back more asphalt glue fixed, in routine, whether it is monolayer or bilayer, positive to take six nails fixed, back to take the dispensing fixed glass tile can be. But because of the north wind is big, whether it is single layer or multi-layer needs to enlarge the back glue dispensing area, in order to reduce the more fixed load weight, double deck standard type glass tile were excluded in, because its weight to be a lot of weight, single standard has become the first choice. But due to the large area of sizing and cost for asphalt adhesive will have a greatly improved, even take back 80% of bitumen glue to calculate, cost is also high scary, in this special case, mosaic glass tile, in contrast, due to its tailored, abaxially Shi glue will reduce the amount, back to take 80% of bitumen glue fixed, you can in the promotion of a large area in the northern region. Thus, mosaic right become the north wind region preferred to solve the practical application in a big difficulty, in after a lot of North glass fiber tile construction practice, mosaic glass tile has become the choice.
澤皓官網：wright-son.com
上一篇：實踐應用說明之雙層標準型玻纖瓦